door closers

MOUNTINGS
Applicable for all 500, 600 and 1900 Series

• Reversible - Mount on left and right handed doors nearest to hinges side
• Universal - Ready for the three common installations as illustrated

Select a mounting based on following considerations:

• Appearance (closers are generally mounted on the room side of a corridor so they are out of the line of sight)
• Shelter from the elements (closer should be placed on inside to shelter from elements)
• Weather stripping and other materials that may restrict the mounting of the door closer
• Underside size of Top Jamb (if preference is parallel arm, then enough material is required to secure parallel plate)

500 Series Door Closer Standard & Medium Duty Commercial Application F E A T U R E S 10-Year Guarantee Meets ANSI Grade 2 - 500,000 Cycle Tests Dual Valve System - Latching and Closing Speed Adjustable Available in Aluminum or Brass Finish Available for Door Sizes 2, 3, and 4

550 Series Door Closer Dual Valve Door Closer F E A T U R E S UL and C-UL Listed 5-Year Guarantee Meets or exceeds requirements or BMHA/ANSI 156.4 - Grade 3 In compliance with CGSB Standards Dual Valve Adjustable (closing and latching speed) Non-handed-reversible for both right and left handed doors High strength pressure cast aluminum housing Full rack and pinion system High lubricity and low pour point high quality hydraulic fluid leak-proof "o" rings Universal mounting (regular and parallel brackets included) conforms to positive pressure- standards UL10C & UBC7 (1977)

600 Series Door Closer Residential & Standard Duty Commercial Application F E A T U R E S 5-Year Guarantee Meets ANSI Grade 3 - 100,000 Cycle Tests Dual Valve System - Latching and Closing Speed Adjustable Available in Aluminum or Brass Finish

1900 Series Door Closer Residential & Standard Duty Commercial Application F E A T U R E S 10-Year Guarantee Meets ANSI Grade 1 - 1,000,000 Cycle Tests Dual Valve System - Latching and Closing Speed Adjustable Adjustable Back-check (cushions the opening swing at approximately 75 degrees from opening (provides resistance to prevent door from slamming against the stop - do not fully close this valve, as a back-check is not intended for a positive stop) Power Adjustable for Door Sizes 2 through 6 (Standard Model) and 1 through 4 (Barrier Free Model) Barrier Free Model (provides less opening tension without jeopardizing the required closing tension) and comes with Delayed Action Feature (provides for additional time to pass through the door before it closes)

Return to Door Closers Introduction

®Registered Trademark of Taymor Industries Ltd.